1,663 of 5,000 Printers minted on Solana. Minting is temporarily closed while the next public settings are verified.
Printer x OTC
Own a Printer.
Get PRINTER.
A 5,000-piece pixel-art collection with protected hourly PRINTER rewards. Each eligible 0.20 SOL spend buys PRINTER, which is divided equally per Printer NFT held at that hour's finalized snapshot.
Hourly automation checks the reward wallet. A funded round waits until 0.20 SOL is available above the protected 0.045 SOL reserve, then buys OTC with 70% and PRINTER with 30%.
70% OTC / 30% PRINTERHourlyDistributed per Printer NFT
Finalized holder rewards
What Printer holders have earned.
Verified on SolanaThrough Sep 22, 10:05 PM UTC
120 wallets reached. Latest complete round: 1,657 Printers across 106 wallets.
Open every receipt →The collection
Printers keep moving.
OTC earned
Tap any Printer to inspect the verified collection on Solscan. New hourly PRINTER distributions use the current finalized holder snapshot, with one equal share of the purchase per Printer NFT.
Minting is temporarily closed while the next public settings are verified.See current mint details.Details →
Hourly PRINTER rewards
Next wallet check.
At the top of every hour, the runner checks for SOL above the protected 0.045 SOL reserve. A run waits until 0.20 SOL is available, then uses all 0.20 SOL to buy PRINTER before distributing it equally per current Printer NFT.
Live hourlyRuns at the top of every hour
5,000Original Printers
100,000PRINTER burned per mint
1Verified minted
3Artwork tiers. Same mint.
From fees to
PRINTER burns.
The launch plan uses collected creator fees to buy PRINTER on the market and permanently burn the tokens purchased.
95%PRINTER buybacks & burns
5%Owner allocation
Illustration only. These are not live funds.
Select a step to explore the plan.
Start with fees actually collected. The 95/5 split applies to creator fees, not to the full value of a trade. Moving SOL between wallets does not create trading fees.
The buy pool would get 95 SOL. In this example, the owner gets 5 SOL. There is no second owner cut from the buy pool. OTC and NFT reward funding each receive zero.
The budget pays for a market buy. A funded pool is not a completed purchase. Buying waits for sufficient funds, liquidity and approved trading limits. The token amount depends on the market and swap fees.
Only the PRINTER bought is burned. The service verifies each purchase, then burns exactly the PRINTER acquired. Pending burns remain visible until confirmed, and unresolved burns stop further purchases.
Not funded at launch0% OTC buybacks0% NFT reward funding
The 95% funds a SOL buyback budget. Swap fees affect tokens received; network costs are funded separately. Burns do not guarantee price growth or holder income. NFT mint burns and paid resale royalties follow separate rules.
Read the full plan →Find your Printer.
Explore the artwork. Every mint is a random original.
Loading collection
1,663 NFTs verified as minted. Check individual editions for status.
One payment. One burn. One original.
Pay 0.1 SOL and burn 100,000 PRINTER to mint one random collectible.
Ecosystem impact
Every mint removes supply.
Every paid resale can feed the loop.
Alongside the creator-fee plan above, minting burns PRINTER directly. Paid resale royalties follow their own 90/10 plan. These NFT mechanisms remain separate from creator fees.
01 / Mint100,000 PRINTER
Burned for every Printer minted.
The tokens leave the minter's balance permanently. The project does not receive them.
02 / Paid resale5% requested royalty
Paid royalties follow a separate split.
01
Royalty receivedA supported marketplace pays the requested 5% resale royalty.
02
PRINTER bought and burnedThe plan assigns 90% of royalties received to PRINTER buys and burns.
03
Project kept runningThe remaining 10% supports collection operations and infrastructure.
Transparent by design
Only royalties actually received enter the loop. Every completed buyback and burn will link to its Solana receipt. The exact allocation is published in How it works.
Explore OTC
See the ecosystem that inspired Printer.
Follow OTC desks, public revenue, documentation, and on-chain activity. Printer remains an independent project and is not affiliated with OTC.
Mint a Printer.
Connect Phantom, confirm your balance, and approve one atomic transaction.
One random Printer costs0.1 SOL + 100,000 PRINTER burned
One payment. One burn. One random original.
The SOL payment, PRINTER burn, and NFT mint happen together. If the transaction fails, you are not charged and your tokens are not burned.
Loading collection progress0%
Wallet not connected
Balance checks after connection
The PRINTER token is verified. NFT mint setup and the launch test are pending.
- Connect PhantomUse the wallet that holds your PRINTER.
- Check balance0.1 SOL payment, 100,000 PRINTER, plus SOL for fees.
- Approve onceReview the exact payment, burn, and NFT mint in Phantom.
Token100,000 PRINTER
Payment and feesKeep at least 0.105 SOL available
WalletPhantom desktop, or Phantom's mobile browser
On iPhone or Android, open printerotc.fun inside Phantom's in-app browser. Safari and Chrome cannot connect directly to Phantom mobile.
Phantom shows the exact burn and network transaction before approval. Never share your recovery phrase.
A Printer NFT gives access to holder discussions and the current holder route. Read the public Solana ledger and operating limits. Burning PRINTER does not guarantee token value or a return. Solana network fees apply.
Resales feed the Printer ecosystem.
A clear split for royalties that are actually collected.
5% resale royalty
Recorded on the collection for secondary NFT sales. Payment depends on marketplace support and enforcement.
90% buyback and burn
Ninety percent of received royalties is planned for PRINTER purchases, followed by verified token burns.
10% project
Ten percent of received royalties is planned for project operations.
The collection already records a 5% royalty. The planned automatic 90/10 split stays paused until the dedicated service wallets and a live pilot are complete.
On-chain transparency.
Minting, rewards, royalties, and project wallet activity. Every record opens on Solscan.
Solana, in public
Every important action has a receipt.
Browse every finalized transaction tied to the collection, mint machine, reward wallet, royalty wallet, PRINTER token, and public project wallet. No wallet connection is required.
Public proofRead only. Verifiable.The website never asks for a wallet signature to view transaction history. Solscan is the final public record.
Cumulative verified totals
Holder rewards, in numbers.
Verified on SolanaThrough Sep 22, 10:05 PM UTC
120 wallets reached. Latest complete round: 1,657 Printers across 106 wallets.
Browse the holder ledger →Per Printer, not per wallet
What did one Printer receive?
Every Printer in a completed holder snapshot gets the same token amount for that round. The dollar figure below uses current market prices, so it is an estimate of the tokens received, not a USD transfer.
Look up your PrintersLatest completed round per PrinterChecking...
Loading verified payout amounts.
Checks for new payouts every 30 seconds.Individual Printer totals are shown in the wallet lookup. A historical four-hour make-up payout is included in wallet receipts but cannot be assigned to specific NFTs because those asset snapshots were not retained.
Full Solana ledger
Follow the money and the mints.
Choose an account, page through its finalized history, and open any signature on Solscan.
Printer mintsCollection activity for every finalized Printer mint.
View full accountLoading finalized transactions...
Loading the public Solana ledger...
Current holder route
Hourly OTC and PRINTER checks.
The runner checks the public reward wallet at the top of each hour. When 0.20 SOL is available above the protected reserve, 70% of that spend buys OTC and 30% buys PRINTER. The purchased tokens are divided equally per Printer NFT in that hour's finalized holder snapshot and sent to current holders. Skipped rounds create no purchase. Completed rounds must appear in the Holder rewards ledger above.
70% OTCDistributed per NFT
30% PRINTERDistributed per NFT
View the verified September 21 OTC campaign receipts
Campaign5 purchases45.98 SOL total
Latest snapshot435 Printers37 holder wallets
Delivery178 finalized0.000804 OTC campaign dust
Verified chronology
Campaign timeline
From the original creator-fee claim through the final holder distribution.
- 01
46.863199501 SOL claimed
The pre-sharing creator-fee claim finalized on Solana. The owner wallet received 46.863187331 SOL after the 0.000012170 SOL network fee.
View claim receipt - 02
Live route proven
The 0.01 SOL pilot purchased 177.484842 OTC and distributed it across 294 Printers held by 34 wallets.
View pilot purchase - 03
Campaign completed
Five protected purchases used 45.98 SOL and delivered 794,484.485700 OTC through 178 finalized wallet transfers.
View final purchase
Including the earlier 0.01 SOL pilot, 45.99 SOL purchased 794,661.970542 OTC and produced 212 finalized wallet transfers. The reward wallet retained 0.044815795 SOL for operations and 0.001080 OTC as indivisible dust.
Separate automation feed
Creator fees and royalty receipts.
Finalized 95/5 creator-fee activity and separate 90/10 NFT royalty activity. This is not the hourly holder ledger.
Connecting to the receipt feed...
PRINTER burnedNot availableConfirmed separate burns
SOL spent on PRINTERNot availableConfirmed separate purchases
SOL paid to the projectNot availableConfirmed owner or project transfers
Waiting for the receipt feed
Confirmed activity appears here automatically.
How PRINTER buybacks work.
The launch plan puts creator fees back into PRINTER. Follow the budget, the purchase and the burn.
From fees to
PRINTER burns.
Collected creator fees buy PRINTER on the market and permanently burn the tokens purchased.
95%PRINTER buybacks & burns
5%Owner allocation
Illustration only. These are not live funds.
Select a step to explore the plan.
Start with fees actually collected. The 95/5 split applies to creator fees, not to the full value of a trade. Moving SOL between wallets does not create trading fees.
The buy pool would get 95 SOL. In this example, the owner gets 5 SOL. There is no second owner cut from the buy pool. OTC and NFT reward funding each receive zero.
The budget pays for a market buy. A funded pool is not a completed purchase. Buying waits for sufficient funds, liquidity and approved trading limits. The token amount depends on the market and swap fees.
Only the PRINTER bought is burned. The service verifies each purchase, then burns exactly the PRINTER acquired. Pending burns remain visible until confirmed, and unresolved burns stop further purchases.
Not funded at launch0% OTC buybacks0% NFT reward funding
The 95% funds a SOL buyback budget. Swap fees affect tokens received; network costs are funded separately. Burns do not guarantee price growth or holder income. NFT mint burns and paid resale royalties follow separate rules.
View receipt status →The 95/5 creator-fee route is planned and is not active yet. OTC operates its own separate fee model, described in OTC's docs. No fixed rewards or returns. Computer artwork by OTC Desks.
Printer holder
A Printer is a collectible with access to holder discussions. Its creator-fee reward allocation is currently 0%.
A separate protected hourly PRINTER reward route is live.
OTC desk holder
The OTC desk pot buys tokenized stocks and distributes them to eligible desk vaults.
Separate from the PRINTER launch allocation.Creator-fee claims are active. The older PRINTER purchase-and-burn service remains paused. Holder purchases run through the separate protected hourly task.
How collected creator fees are routed
Qualifying PRINTER trades can generate creator fees. The active claim route sends 95% of collected fees to the reward wallet and 5% to the owner. When the protected hourly threshold is met, that wallet buys OTC with 70% of the 0.20 SOL round and PRINTER with 30%, then distributes both tokens to current Printer NFT holders.
Receives the claimed creator-fee share for the separate capped hourly holder route.
Goes directly to the owner. There is no second owner cut from the reward budget.
Of each funded 0.20 SOL round, 0.14 SOL buys OTC and 0.06 SOL buys PRINTER.
For example, 100 SOL of collected creator fees routes 95 SOL to the reward wallet and 5 SOL to the owner. The hourly task does not spend that 95 SOL at once. Each funded round is capped at 0.20 SOL and protects a 0.045 SOL reserve. Actual tokens received depend on market prices, liquidity and swap fees.
Owner controls
The selected launch uses the existing managed wallets with owner-controlled automation. The native creator-fee claim routes 95% to the reward wallet and 5% to the owner. Holder rewards are direct token transfers, not a burn or token lock.
Pump recipient shares become permanent when finalized. The owner controls the claim automation and the separate scheduled holder task. The older purchase-and-burn engine remains paused.
Other ways PRINTER can be burned
- Minting a Printer burns PRINTER. The planned mint permanently removes 100,000 PRINTER to create one NFT.
- Paid NFT resale royalties use a separate budget. Of royalties actually received, 90% is planned for PRINTER buybacks and burns, with 10% for project operations. That royalty split does not apply to creator fees.
A transfer alone does not generate creator fees. Unpaid royalties fund nothing. Burns reduce supply, but do not guarantee a token price or return. The hourly holder route only spends SOL above its protected reserve and sends purchased OTC and PRINTER directly to current holder wallets.
The collection
Printer is an independent collection of original pixel-art machines. Each has a numbered identity, a case finish, a backdrop, a paper feed, controls and a seal. Pick one because you like it.
Minting a Printer
Each mint pays exactly 0.1 SOL, burns exactly 100,000 PRINTER tokens, and creates one random NFT from the remaining pool. Printer #0001 is the completed pilot, so the remaining mint contains Printer #0002 through Printer #5000. Standard, Collector and Signature are visual categories. They all use the same price and burn amount.
The PRINTER token is verified. Minting is temporarily closed while the next public settings are verified.
Where your Printer lives
After purchase, the NFT belongs to your Solana wallet, such as Phantom. Connect that same wallet to Magic Eden to view your collectibles or list them for resale. The NFT needs to be minted and supported by the platform before its artwork can appear in a wallet or marketplace view.
What you own
A Printer is a digital collectible, and current holders can already join private discussions. Creator-fee funding for OTC remains 0%. The separate hourly wallet route is active, and there is no holder claim flow. Eligible PRINTER is transferred directly after a finalized snapshot. No physical printer is included.
The token burn
The burned PRINTER tokens are permanently removed from the minter's balance in the same transaction that creates the NFT. The project does not receive those burned tokens. A smaller token supply does not guarantee price appreciation, profit or liquidity.
Transparent mechanism
How resale royalties move.
The collection records a 5% royalty on secondary NFT sales. It applies only when a marketplace supports and pays it. Unpaid royalties create no buyback budget.
Requested from a supported secondary sale and sent to the dedicated royalty intake wallet when paid.
Assigned to PRINTER market purchases followed by confirmed token burns.
Assigned to project operations, infrastructure and collection upkeep.
Example resale1 SOL
Royalty received0.05 SOL
Buyback and burn0.045 SOL
Project operations0.005 SOL
Current state: The 5% collection royalty is recorded on-chain, both dedicated service wallets exist. Their updated signing policies still need verification. Automatic splitting and buybacks stay paused until the collection recipient is updated, service credentials are saved and one live pilot is verified. Completed activity will appear on the Receipts page with Solscan links.
Public launch records
Wallets, tokens and collection.
These are public Solana addresses only. Every ready address opens in a block explorer. No private key or seed phrase is stored on this website.
Project treasuryReady
Not configuredOwns the collection. Planned shares: 5% of creator fees and 10% of paid NFT royalties.
Royalty intake walletCreated
Not configuredReceives honored 5% resale royalties after the collection recipient is updated.
Printer collection CAReady
Not configuredThe verified 5,000-piece Core collection account.
OTC token CAReady
Not configuredThe OTC token address referenced by the Printer ecosystem.
Printer #0001 pilot NFTMinted
3LYyMpijzC2Y55oCatyPnWpYnkvrJ7UjKmMxLQiRNAqQThe completed on-chain pilot inside the collection.
PRINTER token CAVerified
3e6to4qrHByU19Sij9DVKPB4AQD5RuyhH2Sj2ESLpumpVerified Token-2022 mint with 6 decimals. Mint and freeze authorities are revoked.
NFT mint programWaiting
Deployment pendingThe integrated program burns tokens and creates the NFT and its vault in one transaction.
Reward wallet70% OTC / 30% PRINTER
Not configuredRuns the protected hourly holder route while preserving 0.045 SOL. The earlier PRINTER buy-and-burn automation remains paused.
NetworkLive
Solana mainnetAll launch addresses and receipts use mainnet.
Can I buy yet?
Not yet. Minting is temporarily closed while the next public settings are verified.
Is Printer affiliated with OTC or Magic Eden?
No affiliation or endorsement has been established. Printer is an independent novelty collection, and Magic Eden is the planned marketplace.
Memes & artwork.
For the timeline, the group chat, and the desk that never sleeps.
Loading the memes...
Keep the replies printing.
Wide reaction cards for roll calls, welcomes, GM posts, receipts, wins, misses and late-night desk checks.
Pick your Printer.
All 5,000 originals. Find a number or colour, save the PNG, or put it in a meme.
No Printers match that search.
Loading the marketing collection...
Choose your look
Your profile
A matching PFP and banner.
Profile photo
X banner
Take it to the feed.
Original-size PNGs. Ready to upload.
A caption to match.
Computer artwork by OTC Desks. Printer artwork by Printer. Downloading artwork does not transfer an NFT. Printer is independent and is not affiliated with OTC.
Original art. Community humour.Local program preview
Phantom can sign a free local proof. No transaction, token, reward, or live service is connected.
Printer check-in
Is your machine running?
Check in once each day. Add one sheet to the Community Print Run, earn 10 Ink XP, and move the machine toward its next unlock.
Automatic daily check-inConnect Phantom once
Approve one free sign-in message. On return visits, a trusted wallet can reconnect quietly and add the day's sheet when this page opens.
No transaction or token approval is requested.
Rank checks use local sample data. Live wallet lookup is not enabled.
Your run
Not checkedPreview holder
Ink XP120
RankPrint Operator
This week0 of 5
Weekly qualification5 check-ins needed
Use the preview wallet to load your local run.
The Phantom option signs one free login message when enabled. Future local visits use an HTTP-only preview session. Neither path submits a transaction or awards a real benefit.
Ink XP ladder
Show up. Move up.
Ranks recognize participation. They do not increase lottery odds or multiply holder distributions.
- 0 XPPaper LoadedThe machine is ready.
- 50 XPPrint OperatorThe daily habit begins.
- 150 XPPress TechnicianA reliable weekly runner.
- 350 XPFloor SupervisorConsistent community presence.
- 750 XPMaster PrinterThe full season standard.
How the machine works
One verified wallet. One sheet. One day.
- 01Connect once
Phantom proves wallet control with a free message. A trusted return visit can then check in without another popup.
- 02Build the week
Five check-ins out of seven completes the weekly Print Run. A perfect week is cosmetic only.
- 03Protect fairness
A funded launch would use the existing private person pass so linked wallets cannot add extra sheets.
The Printer community desk.
Link your holder wallets, use every Printer as one vote, earn Ink XP through real participation, and follow the reward ledger in one clear place.
Community V2
Everything your holder profile can do.
One signed message opens the community. Wallet addresses stay private in public results. NFT transfers always require a separate Phantom transaction that you review.
Sign in to begin earning Ink XP.
Open wallet desk
See your Printers and rewards. No wallet connection.
Paste any public Solana wallet address to see the Printers it holds now and the OTC or PRINTER holder rewards sent to it in our verified ledger. No signature, transaction, or token approval.
Only public on-chain ownership and finalized reward receipts are shown. This does not sign you in.
Wallet report
Printers in this wallet now
Reward receipts
Rewards are historical transfers to this wallet, not a promise of future payouts. An NFT can move to a different wallet after a reward was paid. XP and the community top-three pool are separate.
Transparent participation
Earn XP. See every rule.
XP rewards useful participation, never wallet count or NFT count. NFT count affects only polls marked as NFT-weighted.
Community seasonLoading...
Ways to earn
Loading the XP rules...
Leaderboard
Public alias and XP only- Loading season scores...
Top-three poolNot funded
Split50% / 30% / 20%
StatusNo token movement enabled
Scores can be tracked now. A reward manifest cannot freeze until the season is closed and the exact PRINTER pool is funded and approved.
Holder lottery
Not activeOne verified Printer. One signed ticket.
Joining earns 5 XP once per round. Every entry requires a fresh free signature from the wallet currently holding that exact NFT.
Entry poolWaiting for approval
People entered0
CloseDaily
Today's poolNo live prize configured.
This local candidate is off until the pool and rules are approved.
Close00:00:00hours minutes seconds
Signed NFT draw reel
Your signed Printer enters the draw reel.
Verified Printers move through the fixed selector while entry is open. The artwork is public, but wallets and person-pass identities stay private.
Your PrinterVerified entry
0signed
Current holderRequired
Fresh NFT proofSigned when you join
XP rule5 XP once per round
Draw proof
Private holder profile
Holder sign-in requiredOne profile. Every Printer you own.
Link up to five wallets you control. Every current Printer becomes one vote in NFT-weighted decisions while XP remains one combined profile score.
Your collectionPrivate until you sign in
Sign in with a holder wallet to see your verified Printers.
Owner checkLinked holder wallets
No wallet details are public.
Circle-safe export
Holder PFP studio
Put your Printer in the profile picture.
Choose a Printer verified in this wallet, pick a press style, and download a crisp 1024 pixel image for X, Discord, or anywhere else.
Choose your Printer
Connect a holder wallet to unlock your collection.
Choose a press style
Free image export. No transaction or token approval.
Self-custody transfer
Send one Printer to another wallet.
Select a Printer held by the connected wallet. Printer never receives custody. Phantom shows the final NFT, destination, and Solana network fee before anything moves.
Private one-time wallet link
Open this link in the browser connected to your other holder wallet. It expires in 10 minutes and works once.
Wallet invitationJoin an existing profile
Connect the invited wallet and sign a free message. The wallet must currently hold a Printer. Your profile still receives one daily chance.
Wallet addresses, NFT asset addresses, and person-pass identity stay private.
Community decisions
Every Printer gets a voice.
New NFT-weighted polls count one vote for every currently verified Printer in your linked profile. Older polls keep the rule they opened with so historic totals never change silently.
0open decisions
Loading the current vote...
Each poll displays whether it counts wallets or Printer NFTs.Roadmap signal only. Voting cannot move funds, change mint pricing, or activate rewards.
Use the wallet holding a Printer NFT.
Free sign-in. No transaction or token approval.
Read discussions, post ideas, and reply.
Your Printer is your key.
Connect the wallet holding your Printer NFT. A free message signature verifies ownership without moving tokens or SOL.
Your sign-in stays saved on this browser for 30 days. Sign out on shared devices. No ads or analytics.
Having trouble finding your Printer?
One Printer NFT is enough. Use that NFT's public asset address, not your wallet address or recovery phrase. Then connect again. On mobile, open this page inside Phantom.
Private holder check-in
Checking eligibilityPut your wallet on the private claim list.
This signed-in wallet is checked against the reviewed launch list, current Printer NFT ownership, and a finalized balance of at least 100,000 PRINTER.
01Printer NFTVerified for private access
02Launch walletChecking the private list
03PRINTER balanceWaiting for finalized balance
This is a private interest record, not an airdrop promise. It never asks for a transaction, payment, token approval, recovery phrase, or private key.
Be the first to start a conversation.
A question, an idea, or a simple hello.
Good discussions start small.
This discussion is closed to new replies.